(redirected from tongue-and-groove boards)
Also found in: Dictionary, Encyclopedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
  • adj

Synonyms for dressed

dressed or clothed especially in fine attire

treated with medications and protective covering

Related Words

(of lumber or stone) to trim and smooth


Related Words

References in periodicals archive ?
Fit five of the 1-by-6 tongue-and-groove boards (N) together to create a door panel that's wider than you need.
Staple thick polythene sheet over to reduce condensation and finish off with tongue-and-groove boards, fixed with panel pins.
ONE Using a square, measure and mark all the battens and tongue-and-groove boards and saw the timber to the correct size.
The floor was made of tongue-and-groove boards, doubled where the box rested on the running gear bolsters.
Cover the triangular opening in the truss above the house wall by building a 2x2 frame and nailing lx6 tongue-and-groove boards to the back.
If you're lifting tongue-and-groove boards, you'll need to remove the tongues, using a hand-held circular saw.
The floor was built from 2-by-6-inch tongue-and-groove boards nailed to the floor joists to fit the bed stakes along the sides.
Then use them as a guide to cut out the tongue-and-groove boards that make up the door panels (Photo 7).
Only a small amount of the porch roof will be visible, so don't waste money and time running the 1x6 tongue-and-groove boards all the way across the porch roof.