strain gauge

Also found in: Dictionary, Medical, Encyclopedia, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
  • noun

Synonyms for strain gauge

a gauge for measuring strain in a surface


Related Words

References in periodicals archive ?
This is because the distance between the strain gauge on the transmitter bar and the interface between the bars is less than the distance between the strain gauge and the free end of the transmitter bar.
So Clark and team at Unimelb tore down a Wii balance board and hacked into its strain gauges and accelerometers to tap into their raw data.
Edward Simmons of Caltech invented the bonded strain gauge in 1936 (2).
The strain gauge method can investigate only a few small areas on the board at a time.
The unit for R is appropriate for the type of deflection-sensing system employed by the transducer, which may be mechanical (in proving rings, for example), electronic (for strain gauge load cells), or hydraulic.
A strain gauge (Tokyo Sokki FLA-5-11, gauge length 5 mm) was bonded on the longitudinal-radial plane opposite to the loading points, and a linear displacement gauge was set below the specimen to measure the deflection at the bottom of the center.
A Universal version comes with a 15-foot cable for connection to strain gauge based weighing instruments.
A new electrical resistance strain gauge, commonly known as the SR-4 gauge, is the latest strength sleuth adopted by the industry to find the amount of strain to which wood is subjected in various uses.
They then attached the other end to the tip of a strain gauge and pulled the taut molecule until it separated from the surface.
Piezoelectric pressure sensor works on piezoelectric effect, and is also known as Strain gauge pressure sensor.
The ICA range of miniature load cell signal conditioners offers a high performance strain gauge amplifier in miniature OEM format, designed specifically for fitting inside load cells, thereby converting a standard load cell to a 0-10 volt or 4-20mA output.
Stress distribution and deformations within the testing stand were checked by FEM analyses and strain gauge measurements.
Each tube had a strain gauge at the bottom to measure and log the forces the players' fingers were applying on each shot.
The strain gauge transducers are placed on one of the friction unit samples, and that is applicable only in laboratory.
The floor-mounted units employ strain gauge load cells for direct measurement of force to eliminate piston friction and other non-linearities.