(redirected from pusher plate)
Also found in: Dictionary, Medical, Encyclopedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
  • all
  • noun
  • verb

Synonyms for plate

Synonyms for plate

(baseball) base consisting of a rubber slab where the batter stands

a full-page illustration (usually on slick paper)

dish on which food is served or from which food is eaten

the quantity contained in a plate


Related Words

a rigid layer of the Earth's crust that is believed to drift slowly

Related Words

the thin under portion of the forequarter

Related Words

a main course served on a plate

Related Words

the positively charged electrode in a vacuum tube

a flat sheet of metal or glass on which a photographic image can be recorded

structural member consisting of a horizontal beam that provides bearing and anchorage

a shallow receptacle for collection in church

Related Words

a metal sheathing of uniform thickness (such as the shield attached to an artillery piece to protect the gunners)

a dental appliance that artificially replaces missing teeth

References in periodicals archive ?
The ejector tray has been designed as a two-stage ejection system so that it will move the pusher plate the entire length of the rear body smoothly and quickly.
The Novacor design uses two blood-sac pusher plates to pump blood through the body.
The pusher plates are epoxy-bonded to a seamless trilaminar flexible blood sac, consisting of a butyl rubber layer sandwiched between two layers of the polyurethane Biomer.
Each beam-spring is connected to its own solenoid mechanism and extends down on opposite sides of the pump to the pusher plates.
In the new design, the pusher plate actuating mechanism has been changed, the motor has been redesigned to include neodymium iron magnets instead of the previously used samarium cobalt, and smaller and faster electronics have reduced overall weight and increased system reliability.
The overall design still incorporates the linear actuated pusher plate concept, but the rotating cam mechanism has been replaced by a roller-screw drive.
Three Hall-effect sensors placed in the motor housing alert the controller to the rotary position of the motor from which the related pusher plate position can be calculated.
For ease of change-over, the packer has a handwheel with digital scale reading for all required settings, which means that the only changeparts are pusher plates, and there is no need for adjustment to the line layout whatever size of bottle is being packed.