pull-off


Also found in: Dictionary, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Synonyms for pull-off

designated paved area beside a main road where cars can stop temporarily

References in periodicals archive ?
The Elcometer 510 Automatic Pull-Off Adhesion Tester has been designed to measure the bond strength between a coating and its substrate using an automatic hydraulic pump to ensure smooth and continuous pressure application for consistent and repeatable results.
The Elcometer 510 Automatic Pull-Off Adhesion Tester is available in two formats, S and T.
Many National and International Standards including ISO 4624 & ASTM D4541, require the user to record not only the pull-off force but also the nature of the fracture by examining the face of the dolly and assessing the adhesive/cohesive failure of the coating system.
The proper preparation of the base layer, which can be described in terms of surface roughness, is a major determinant of pull-off adhesion [f.
Literature reports indicate that also acoustic methods can be useful for assessing the pull-off adhesion of the concrete layers in floors (Beutel et al.
In Hola and Sadowski (2012) an attempt was made to determine reliable correlations between the individual parameters recorded by the impulse response technique and the pull-off adhesion determined by the pull-off method.
By moving the range gate out in time, the range gate pull-off jammer moves the resolution cell away from the target, as shown in Figure 3.
However, if the pull-off rate exceeds the radar's tracking rate, the jamming will fail.
Two counter-countermeasures are effective against range gate pull-off jamming.
While some retailers have recently set their zipper pull-off strength standards of 22 lbs, Talon KidZip zippers surpasses this standard substantially with a pull-off strength of up to 50 lbs.
2American Society for Testing and Materials (ASTM) pull-off strength standard is 18 lbs.
These lightweight, portable and easy-to-use adhesion gauges are available in analogue or digital versions and are suitable for measuring the pull-off adhesion of coatings up to 50MPa (7250psi) either on-site, or in the laboratory.
For users who require confirmation or verification of the accuracy of their pull-off adhesion gauges, the Elcometer Adhesion Verification Unit (AVU) is also available.
With the PosiTest Pull-Off Adhesion Tester, coating inspectors worldwide can now measure adhesion of coatings on metal, concrete and other substrates easily and effectively.
The PosiTest Pull-Off Adhesion Tester uses a unique self-alignment system that enables an evenly distributed pull-off force on both smooth and uneven coating surfaces.