machine bolt


Also found in: Dictionary, Encyclopedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Words related to machine bolt

a bolt with a square or hexagonal head on one end and a threaded shaft on the other end

Related Words

References in periodicals archive ?
What you'll need for cardboard puzzles: An electric drill with countersink tool; cutting pliers; 10-24 x 3/4-inch long, flat-head machine bolts with nuts (one for each puzzle piece); and a piece of 1/4-inch OD x 0.170 ID vinyl tubing (you'll need a 1 and 1/2-inch long piece for each puzzle piece).
Machine Bolt Expansion Shield: for use in solid masonry; expands full length of anchor; also available for lag screws
My answer to a linch pin for the shafts is a 1/4" hex-head machine bolt selected so that its unthreaded section is long enough to pass through the fitting and protrude at least 5/16" past the other side.
Tenders are invited for Machine Bolt Cfh 3/4 Inch-10 X 2.1/2 Inch To Drg.
machine bolt in the end of the track to keep the door from opening too far.
The adjustment is a standard machine bolt held by friction washers.
Tenders are invited for Machine Bolt Cfh 3/4 Inch-10 Unc-2Ax2 1/2 Inch Drg No.2P-10002-080 Alt-Y Spcen No.4/Dcw/Spcen 1P Kg/041/Alt-A1.
Part PN NSN Bracket assembly 12379841 2590-01-473-2719 Ring spacer 12379846-1 5365-01-473-0415 Ring spacer 12379846-2 5365-01-473-0409 Connecting link 12379847 3040-01-472-7745 (M939A1 kit only) Connecting link 12379848 3040-01-472-7747 (M939A2 kit only) Straight pin MS20392-7C113 5315-00-904-1634 Cotter pin MS24665-287 5315-00-011-9120 Cotter pin MS24665-355 5315-00-012-0123 Plain hex nut (2) MS35691-38 5310-00-891-1733 Straight pin MS35810-6 5315-00-140-1938 Rod end clevis MS35812-11 5340-00-664-7597 Machine bolt (2) B1821BH050C150L 5306-01-123-0891
Here's what you get in the kits: Part NSN Bracket assembly 2590-01-473-2719 Ring spacer 5365-01-473-0415 Ring spacer 5365-01-473-0409 Connecting link 3040-01-472-7745 (M939/A1 kit only) Connecting link 3040-01-472-7747 (M939A2 kit only) Straight pin 5315-00-904-1634 Cotter pin 5315-00-011-9120 Cotter pin 5315-00-012-0123 Plain hex nut (2) 5310-00-891-1733 Straight pin 5315-00-140-1938 Rod end clevis 5340-00-664-7597 Machine bolt (2) 5306-01-123-0891
Tenders are invited for Machine Bolt Cfh 7/8 Inch-9 Unc-2A X 2.3/4 Inch To Drg No.2P-10003-088 Alt-Y.
Tenders are invited for 2200 ea of Machine bolt, 5/8" diameter x 12" long; 6" minimum thread length, 12,400 lbs minimum tensile strength.
Tenders are invited for Qty 1350 - machine bolt, 5/8" diameter x 12" long; 6" minimum thread length, 12,400 lbs minimum tensile strength, roll threaded, hot dip galvanized steel, cone point, with a square nut attached.
Tenders are invited for 600 EA Guy hook, integral spur type, for 3/4" machine bolt. Ductile iron, hot dipped galvanized.
13 machine bolt hexogonal with nut ss304 m6 x 30 mmlong -50 nos
Tenders are invited for Supply Of Ameca Make Spare Parts For T-28 Machine, Hydraulic Pump For Bcm-320 Machine Bolt For Unimat Machine And Different Type Spare Parts For Dts-96 Machine Working On N.W.