in die cast zinc, steel, brass or stainless steel may be push-fit or inserted
by self-tapping thread cutting, others may be moulded in place.
Although the many benefits of insert
over-molding outweigh the negatives in most cases, consideration should be given to each specific application before deeming it appropriate for a project.
Currently in India, the structure and content of the information on the inserts
appears to be geared towards prescribers only and the text in Schedule Y of the rules does refer to package inserts
as prescribing information.
I've seen inserts
dropped that don't belong at a particular property sit for weeks until someone starts asking questions and the insert
is redirected; usually right after it should have been inserted
The item also contains a fastener component configured to removably join the insert
to the reusable outer cover, wherein the fastener component serves as an insert
indicium by being cooperative with a cooperating component of the reusable outer cover to effect fastening with correct front-rear orientation of the insert
with respect to the reusable outer cover, and by not being cooperative with a component of the reusable outer cover to effect fastening with incorrect front-rear orientation of the insert
with respect to the reusable outer cover.
U.S. Patent No. 8,932,273 B2 Disposable Absorbent Insert for Two-Piece Wearable Absorbent Article: Donald Carroll Roe, West Chester, OH; Eiro Fukuda, Mason, OH; and Oscar Antonio Ruiz, Mason, OH. Assigned to The Procter & Gamble Company, Cincinnati, OH
In feedblocks such as the Ultraflow I, specially machined flow inserts
are used to provide a target cross-direction thickness profile for each layer.
for the Ultraflow I feedblock that can be adjusted during coextrusion enable manufacturers of film and sheet to reduce downtime and material waste while permanent flow inserts
are prepared, as well as achieving greater precision in the ultimate thickness profiles of each layer across the width of the die, says the company.
"Before writing about the INSERT
NAME OF PRODUCT, however, we should greatly appreciate the chance to use it ourselves, when we are sure we shall become even more impressed with its qualities and be able to praise them from first-hand experience.
We tested two types of ceramic indexable cutting inserts
. These cutting inserts
have a standard shape SNGN 120716 and used materials were FX105 and CX710 (Tungaloy Catalogue, 2007).
molding also frees the designer to move into the third dimension.
As pocket wear and insert
movement occur, the most noticeable result is reduced accuracy of the cutting edge location, which in turn detrimentally affects the accuracy of the workpiece.
(2003), reported that cryogenic treatment improved the wear resistance and overall tool lives of tungsten carbide tool inserts
in turning .
The basic stages of the technological process of making the pump body insert
pressure casting dies were machining operations.
Separate month and year inserts
were installed, or a dual-ring insert
was put in place, marked with only the current year.
the hexagon screw with the lockwasher into the left side of the lever and pintle holes.