From the interfacing, cut two fronts, two backs, two gussets
, one flap and one 1 1/8"x29" strip for the strap.
Tender notice number : Alluminium Gussets
And Cleat ID:2016_MSRTC_138649_1
Current repair methods include plywood or oriented strand board (OSB) gussets
and dimensional lumber scabs attached with nails, proprietary high-strength screws, through-bolts, or lag screws.
The square gussets
may either be cut separately, or included on the sleeve pattern, which is why a dotted line is shown on one sleeve of the sleeve assembly drawing.
and bi-swing back allow for extra reaching room, while the princess seams and adjustable side taps allow for a better fit.
If the gusset
angle does not make a difference on the cleaning ability of the wing pulley, what does?
My favourite gripe so far is from a BBC blogger who moans that alongside saggy bottoms and bad elastic, the gussets
on M&S pants just aren't wide enough.
The curtains are supported by compressible, triangular foam gussets
8-1-1/2" x 5/16" carriage bolts (to attach attach and detach gussets
on the four longest legs)
the system was built for Hyplast NV in Belgium to make either the full 65-ft width of film with gussets
and wind it on 16-ft rolls, or wind narrower film flat without gussets
GPL buckets are made with an An400 steel cutting edge with reinforced corners and gussets
High-strength steel use in the unibody structure is up 24%, and changes made to the rear cross member, damper gussets
, hatch opening, front underfloor and cross member, and dash top member increases bending rigidity by 84%, torsional rigidity by 3%, and reduces body vibration 6 dB at idle.
Panties on parade - why on earth are all these celebrities exposing their gussets
to all and sundry?
Calumet's investment in modern CAD equipment and specially engineered glue and folding process enables the creation of gussets
that expand to match the depth of package contents.
The slide gussets
are placed in registration--up to, and just below the slider, thereby creating only two panels for easier sealing.