drill rod


Also found in: Dictionary, Encyclopedia, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Synonyms for drill rod

carbon steel used for rock drills and dowels

Synonyms

Related Words

References in periodicals archive ?
Like other lower-tier options on the market, Silver Series drill rod is composed of S135 common grade steel.
In this paper, the mechanism of water jet assisted rock drilling is explored and the impact crushing experiment assisted with water jet is carried out directed against the different bit types and water pressure in order to obtain the effect of different configuration modes on drilling speed and drill rod vibration based on developing high-pressure water jet sealing device which can realize axial and rotational movement simultaneously for drill rod.
The reaming went slowly because the crew stopped at every rod to attach drill rod to the reamer for subsequent attachment at the exit end of the 700 ft of pipe.
The standard rock drill on the MD5075C is the HPR5123, which uses 45- or 51-mm drill rod.
A center hole is then drilled full length with a #11 (.191 inch) drill that will allow a 3/16-inch drill rod to easily slide through.
housing (3.5-inch diameter) can be used with the Vermeer D16x20 through D40x40 NAVIGATOR or any other HDD rig of similar power and drill rod flexibility.
The guard protects operators from getting their uniforms wrapped up on the rod and also protects them from scraped knuckles, broken fingers, broken hands and even death while the drill rod is turning.
Features: Bolt-on or weld-on, Reversible--can be installed on left or right side, Engineered for 500-gallon tank capacity, Supports tank over fender to increase deck width, Additional drill rod storage under tank, Field-installed with minimal damage / touch up, Painted to be brand-specific.
If not, use drill rod of the same diameter and press fit them into the tool head.
The drill is equipped with positive drill rod clams and breakout system and the rotary drive is gear driven for long life.
The shotpeen process improves the quality of the drill rod by decreasing steel fatigue.
Key improvements from the original kit include a double layer of noise absorbent material together with an upgraded aluminum chassis that has greater resistance to drill rod vibration.