, typically using nitrogen assist gas, is used for cutting
stainless steel and requires a smaller focal spot with low divergence.
There are few studies on cutting
characteristics of natural stone.
Below is shown the comparison of the cutting
The final two chapters, "At the Cutting
Edge" and "The New Cut," move more decisively into the fields of visual and of new media, "proceeding via woodcuts, engraving, photography, sound recording, and film to the digital technology of our own time" (102).
The crop is ready for cutting
within six to eight weeks after sowing.
To find the grainline of your fabric for rotary cutting
, hold the fabric with selvages parallel in front of you.
Lay fabric on cutting
mat with folded edge toward you and raw edge to be straightened to the right (left-handers to the left).
15[degrees] 40' N, Long.32[degrees] 32' E and at of 380 meters above sea level) during the period From December 2010 to October 2011 to study the effect of three cutting
intervals in three alfalfa (Medicago sativa L.) genotypes for some yield and yield components.
A preliminary study on propagation by cutting
of Simmondsia chinensis (in Chinese).
As the direct working mechanism of roadheader, cutting
head works in poor working conditions.
Introduction--The Methodology of Cutting
We'll show you a few of our favorite techniques for cutting
quality depends mainly on the selection of the process parameters that were established with trial and error method.
The 8000 E-Cut mower combines Deere's PrecisionCut mower series with its Quick Adjust 5 cutting
units, allowing the mower to cut a tighter strip.
The cutter can cut diameters from 42-72 inches by adjusting the position of the cutting