Also found in: Dictionary, Acronyms, Encyclopedia, Wikipedia.
Related to crosshead: Crosshead Engine
Graphic Thesaurus  🔍
Display ON
Animation ON
  • noun

Synonyms for crosshead

a heading of a subsection printed within the body of the text


Related Words

metal block that connects to a piston

Related Words

References in periodicals archive ?
Because of different strain-rates (crosshead speeds) used in the tests, no averages and standard deviations are quoted.
Tensile tests were conducted in air with a crosshead speed of 0.84 mm min-1 at various temperatures.
The effects of crosshead speed on compressive strength and compressive modulus are shown in Figs.
Additionally, the company's single-point crosshead is said to offer great flexibility to its users.
Maximum crosshead speed used in the study was 60 mm/min, equivalent to a strain rate of ~0.02 [s.sup.-1].
At least five specimens were tested for each crosshead rate (0.5 mm/min to 500 mm/mm) or rubber content (up to 30 wt%).
JoeTools offers crosshead dies in all sizes for wire/cable coating and in-line dies for pipe and tubing.
The cabinet is useful in many applications, according to the company, especially in crosshead wire and cable extrusion processes, and during setup and changeover times.
A bisphenol A diglycidylether (DGEBA) epoxy was modified with up to 20 wt% of a core-shell rubber (CSR), and mechanical properties were investigated at different crosshead rates (from 0.5 mm/min to 500 mm/mm).
The Micro Medical is an extrusion crosshead that uses micro-fine adjustment screws for precise concentricity adjustment.
The process of polymer encapsulation of small-gauge wire used in the electronics and medical industries is a difficult one, often plagued by "neck-down." The uneven flow of polymer through the extruder crosshead during the process often causes the ultra-fine wire to break.
The equipment used includes an Instron capillary rheometer with two types of dies, namely capillary dies and special annular dies (Nokia Maillefer wire coating crosshead) attached to the rheometer, and an extruder.
The 500 Series crosshead features MAGS gum space adjustment, and is designed specifically for the flow characteristics and processing challenges of elastomeric compounds.
These single-column units have crosshead travel up to 34 in.
Capacity of the units ranges from 20N to 10kN, with crosshead speed ranging from 0.5 to 500 mm/min and crosshead speed accuracy of [+ or -]0.5% or [+ or -]0.025 mm/min, whichever is greater.