crankcase

(redirected from crankcases)
Also found in: Dictionary, Encyclopedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Words related to crankcase

housing for a crankshaft

References in periodicals archive ?
Due to the required sizes of the test pieces, only a limited amount of pieces could be derived from the castings (windmill bedplate/frame, bearing support, and crankcase).
The good news for Lycoming owners is that the company has recently, and quietly, dramatically reduced prices on new crankcases and we're not talking a measly 15 percent, but more like 60 percent.
Wait at least 20 minutes to allow the oil level to stabilize in the crankcase. Checking and adding oil when the engine is first shut off will likely result in overfilling the engine!
The Alfdex design uses centrifugal separation to prevent unclean ventilated crankcase gases from returning to the inlet of the engine.
There are four crankshaft lines for smaller engines, three camshaft lines, three flywheel lines, six cylinder-head lines, four lines to machine covered crankcases, and five crankcase lines for larger engines.
When all that water, laden with the chemicals that ooze from our crankcases and our fertilized lawns, finally reaches a natural river or stream, it's one large dose of poison.
The assets of Danbury brought us new opportunities which will continue at the San Antonio, Texas, location, such as PMA Lycoming part manufacturing (cylinders, crankcases, crankshafts and pistons, plus manufacturing the Titan engine line for the experimental/kit market.
The models were validated on test castings and the Audi 3.01 V6 CGI crankcases. The paper, "Prediction of Microstructure and Local Mechanical Properties for a CGI crankcase," by Christof Heisser and J.C.
Over the past decade, legislative efforts have accelerated to mandate the closing of diesel engine crankcases and eliminate the venting of their emissions into the atmosphere.
The MT-55F, MT-65H and MT-84F are 4-cycle Mikasa rammers from Multiquip that offer a new look, stronger crankcases, a narrower width to allow greater utilization in trenches, and a built-in primary engine air filter to simplify service and maintenance.
The Bobcat is a 3- or 4-axis HMC or transfer module for machining aluminum and magnesium workpieces, such as automotive crankcases, cylinder heads, and transmission cases.
One of those companies, Kurt Manufacturing in Minneapolis, has implemented a flexible system for producing piston-driven aircraft engine crankcases. As a result, 24 different versions of crankcases can be produced in lots as small as one with minimal changeover and effort.
Gebruder Gienanth-Eisenberg GmbH produces 400 coldbox sand cores per day for the production of high performance six- and eight-cylinder crankcases at its gray, ductile and compacted graphite iron shop in Eisenberg.
Closing diesel engine crankcases is a technology path receiving increased attention as global emissions standards become more stringent.
Components covered include connecting rods, camblocks, oil pumps, water hoppers, crankshafts, camshafts, cylinder head castings, pistons, crankcases, flywheel housings and engine sub-bases.