Table 16: World Historic Review for Conventional
These loans can "bridge" the gap from the time of purchase until either the property is stabilized, or the buyer is able to get a conventional
loan or secure other permanent financing.
Brown wanted to emphasize Natural Golf is not trying to compete with conventional
Average concentrations of MDA and TCPY also were significantly lower during the organic phase compared to the conventional
A fish frozen with conventional
technology would show no bleeding and the organs would be an oxidized mush.
of spindle force, which will give better gas mileage than a pneumatic tire at conventional
3) Improved system performance as compared with conventional
Some conductive alloys for conventional
moldmaking have hardness values as high as 30 to 40 Rc, similar to P-20 steel.
The main difference between a TAD machine and a conventional
dry creped machine is that the TAD process replaces the pressing operation with a through-air-drying step (Figure 3).
samples found with no residues are uncommon, and in some cases, rare.
Donald Zipperian of Pace Technologies in Tucson notes that conventional
slurries are mixtures based on ethylene glycol, a toxic substance that's the main ingredient of antifreeze.
By using ceramic molding technology, ceramic cores that can be set into a conventional
sand mold for pouring can be produced Where greater overall accuracy and surface finish is needed, the cope and drag mold halves as well as the core can be produced entirely in ceramic.
By adding speeds to conventional
automatics," he says, "automakers are able to reduce the torque converter's use, lower the engine speed under a variety of conditions, and get the same or better performance while using less fuel.
Yet even as those 1992 targets retreated farther from the realm of possibility--some federal fleet managers, in spite of the mandates, continued purchasing cheaper, more reliable conventional
vehicles in the name of economy and efficiency--the Clinton White House chased harder after them.
But one contemporary biopesticide development company has found that for its chemical control alternatives to become large-scale successes with organic and conventional
producers alike, it must march to the tune of a different drummer.