cold chisel


Also found in: Dictionary, Encyclopedia, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Synonyms for cold chisel

narrow chisel made of steel

Synonyms

Related Words

References in periodicals archive ?
Prise-up your mortar with a pointing trowel if it's loose, or a hammer and cold chisel if it's hard.
Unfortunately, neither Cold Chisel nor Jimmy as a solo artist have made much impact on the world-wide music scene.
WITH a club hammer and cold chisel, remove the broken tile.
It has some kind of universal knowledge and crosses over beyond Cold Chisel fans; it's one of those songs that just connects.
You will need: safety goggles (to keep small debris from getting into your eyes), rubber gloves (to lessen cleanup time after grout work), a grout saw, a small container of tile grout, a grout dye, a glass cutter (or tile scoring tool, available in the tile section), a cold chisel (not a wood-working chisel), a wire brush or pick, toothpicks and masking tape.
Use a hammer and cold chisel to cut through the tile between the holes and to chop out the central portion, taking care not to dig the chisel into the wall.
Somewhere in between, they came up with Cold Chisel, a down-to-earth band fronted by gravel-voiced Jimmy Barnes - a singer who always sounded as if he gargled with self-tapping screws.
Jon Farriss worked on an album with Jimmy Barnes, another Australian who fronted the '70s pub rock band Cold Chisel.
I am able to take a factory, laser sharp blade and create a cold chisel in about 3 strokes.
I felt for once in my life I could say something politically and it says we've all been sold down the river by the government," says Gudinski, whose label is home to top Oz musicians, including Kylie Minogue, Paul Kelly, Kate Ceberano, Jimmy Barnes, Deni Hines and Cold Chisel, plus Garbage.
Ripping the tower off a K80 machine usually requires only a few massive blows from a sledgehammer, followed by the use of a cold chisel to peel off the side of the cash vault, he stated.
ere area few tools you'll need for this job: a hand brush, a pointing trowel, a hammer and a cold chisel.
If the boards are creaking and there are no obvious nail holes, try to lift the board using a cold chisel to see if there are any pipes or cables underneath.
Chip out the cracked portion with a maul and cold chisel.