Moreover, results of the current study are in line with the Thermogravimetric, Differential Scanning Calorimetric
(TG-DSC) analysis of casein variants where the weight loss occurred between 30-1300C and it was found that intercalated proteins degrade at relatively higher temperatures (Yu et al.
9a shows the correlation between the calorific values determined by the bomb calorimetric
method and the LIBS-based multivariate regression, which used the set of 10 first spectral lines in Figure 8.
The value of the correlation coefficient, [R.sup.2] =0.981, between the heating value [Q.sup.p] predicted by LIBS and the calorimetric
heating value [Q.sup.b], is close to the correlation coefficient between [Q.sup.b] and the total carbon content of oil shale (Figure 3(a)).
Value of 145.0 MJ [mol.sup.-1] was calculated for the calorimetric
enthalpy ([DELTA][H.sub.cal]) by an integration of the heat capacity curve.
Coal sample numbers 1 to 5 were used to investigate the effects of maceral compositions of coal on methane adsorption heat, while number 6 sample was used to compare the isosteric heat of adsorption calculated from adsorption isotherms with that obtained from calorimetric
Thermogravimetric assays (TGA) are another type of calorimetric
techniques which measure the weight loss of the samples [34, 38].
MFD11 from differential calorimetric
thermo analysis were 163 and 169 degC respectively.
DSC is more than a calorimetric
technique; it is also considered a thermal analysis, where the physical property being studied is heat (IUPAC, 1994).
CITATION: Kuhl, D., Brabetz, L., and Ayeb, M., "A New Approach to Calorimetric
Efficiency Measurements and Analysis of Electric Vehicle Drive Losses," SAE Int.
method for the determination of serum glutamic oxalacetic and glutamic pyruvic transaminases.
DAMPE joins the Alpha Magnetic Spectrometer and the Calorimetric
Electron Telescope, both aboard the International Space Station, in taking the dark matter hunt to space.
Resting metabolic rate and oxygen uptake during the Zumba Gold exercise class and maximal exercise test were measured using an Oxycon Mobile portable calorimetric
DEVELOPMENT: Automated laser cladding cell, power measurement calorimetric
system, and a laser-assisted machining process that makes post-sintered machining of hard materials a cost-effective alternative to traditional grinding methods.
[DELTA][H.sub.t] = the heat released up to the time t, and it can be obtained by integration of calorimetric
signal dH/dt up to time t.
Lipid Profile: Total cholesterol, HDL-C, triglycerides were estimated by using enzymatic calorimetric