anodize

(redirected from anodization)
Also found in: Dictionary, Encyclopedia.
Related to anodization: Anodised
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • verb

Synonyms for anodize

coat a metal with an oxide coat

Synonyms

Related Words

References in periodicals archive ?
• Custom finishes (anodization) available upon request
Anodizing bath was used to electrooxidize the CNT material by anodization. Boric acid bath contains equal concentration of boric acid compared to Watts bath, in order to observe changes in CNT material by just boric acid application method.
Didier, "Tuning anatase and rutile phase ratios and nanoscale surface features by anodization processing onto titanium substrate surfaces," Materials Science and Engineering C: Materials for Biological Applications, vol.
Before the anodization, the pure titanium foil was ultrasonically washed for 10 minutes in acetone, absolute ethanol, and deionized water.
After anodization at 10 V and 30 V and annealing at 450[degrees]C for 3 h, the morphologies of the Ti[O.sub.2] NT arrays were observed by FE-SEM.
The hard anodization process in sulfuric acid at low temperature easily develops an oxide layer much thicker than natural barrier, up to 150 [micro]m during few hours.
Anodization of silicon in hydrofluoric acid solution is considered the best technique to form homogeneous porous structures reproducibly, although other methods have also been reported, such as stain etching [15], galvanic etching [16], metal-assisted chemical etching [17,18], and contactless electrochemical etching [19].
The look is finished with a silver aluminum case and joined with an adjustable aluminum bracelet with gray anodization.
"Depending on the packaging type, customization begins with either unique base molded colors, metallization or anodization followed by varieties of spray finishes, glitter and stone effects.
* High surface quality, further improved after anodization to obtain superior UV, scratch and corrosion resistance while keeping its unique metal look.
Metal surface preparations for adhesive bonding historically consisted of anodization or etching processes that used strong acids and hexavalent chromium.
The materials have high flowability to fill very thin cross-sections and chemical resistance to acids and bases used for post-molding anodization of metals, says Olano.
By changing the sharp edges into dull edges and reducing anodization time, cracks free transparent anodic aluminum oxide membranes were successfully fabricated.
(anodization method and Thermal Oxidation method) contributes significantly on material processing technology especially the bottom up approach of nanomaterial formation, it contributes in the progression and development of knowledge in the field of nanostructured semiconducting oxides, ceramic science, catalysis and chemical engineering.
After anodization process, the sample was rinsed with deionized water and dried in air.