Wheatstone bridge


Also found in: Dictionary, Medical, Encyclopedia, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Words related to Wheatstone bridge

a bridge used to measure resistances

References in periodicals archive ?
Let us compare the stress sensitivity (25a) with a conventional Wheatstone bridge circuit with four simple stripes of resistors oriented in x- and y-directions (see Figure 17).
Islam, Harsh, "Sensitivity enhancement of wheatstone bridge circuit for resistance measurement", Sensors & Transducers Journal, vol.
The change in resistance gives the change in the output voltage of the Wheatstone bridge. The output of the viscosity sensor is shown in the Fig.3
Piezoresistive materials as strain gauge are deposited in Wheatstone bridge configuration on top of diaphragm to measure the strain exerted on the diaphragm by the air pressure as shown in Figure 5.
The conventional piezoresistive pressure sensor chip functions as a Wheatstone bridge, formed by four diffused or ion implanted strain gauges in the thin silicon diaphragm.
To do this, a Wheatstone bridge circuit must be created.
Chapters address cell structures, properties, and models; cell manipulator fields; metal-oxide semiconductor technology fundamentals; complementary metal-oxide semiconductor (CMOS) based lab-on-a-chip; CMOS electric-field-based lab-on-a-chip for cell characterization and detection; prototyping and experimental analysis; readout circuits for lab-on-a-chip; current-mode Wheatstone bridge for lab-on-a-chip applications; and current-mode readout circuits for the pH sensor.
The inclusion of Wheatstone bridge emulation, which duplicates a standard pellistor output, this also means that existing cables and control devices, from the majority of manufacturers, can still be used.
As the molecules are oxidized, heat is generated changing the cell's resistance as measured by a Wheatstone bridge circuit.
An alternative way of describing the process is to say that the wires are heated by means of a current as an external resistance component of a Wheatstone bridge. As the patient blows through the pneumotach, the resultant cooling of the wires causes a decrease in electrical resistance.
Series 2 for dry-air applications acts directly on the silicon chip and comes into contact with the strain gauges of the Wheatstone bridge. Series 4 acts on the rear side of the silicon chip; is for wet or dry applications.
It provides an integrated front end for industrial process controls, precision data acquisition systems, medical instrumentation equipment or Wheatstone bridge measurement applications.
* To determine the resistance change of the SG, it is operated in a Wheatstone bridge circuit with a constant bridge excitation voltage of UB = 0.5 ...
The TX10K-S transmitter has a Wheatstone Bridge strain gauge, a 350[olm] standard for a sensor input.
Easy-to-read units are industry compatible with any two-arm, 350-ohm Wheatstone bridge pressure transducer.