quirk

(redirected from V-groove)
Also found in: Dictionary, Encyclopedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • all
  • noun
  • verb

Synonyms for quirk

Synonyms for quirk

Synonyms for quirk

a strange attitude or habit

a narrow groove beside a beading

Related Words

twist or curve abruptly

Related Words

References in periodicals archive ?
Figure 3 presents the region chamfered in V-groove upon which the "extra mesh" was added.
Gundrills are inherently out-of-balance due to the V-groove pressed into the shanks, and the shanks will definitely flex if the drill is being spun.
Polyimide in the V-groove joint expanded thermally when heat is applied using integrated heaters, resulting in the dynamic form of polyimide joint (Khire et al., 2002).
"We are pleased to offer our customers the most technologically advanced v-groove splicer while making it one of the most affordable to own," comments Dwayne Holst, product manager for the Lightwave Network Products division at Sumitomo Electric Lightwave.
Knurled V-groove drive rolls are correct for FCAW wire.
Pod has been preparing himself for all eventualities by practising with a pre-1990 60-degree Ping wedge which gives significantly greater control out of the rough than his current V-groove Wilson.
In this case mathematical model is created (three-dimensional V-groove field effect transistor (V-MOS)) (Fig.
He said: "When I got back to Florida from Shanghai a new set of V-groove irons from Srixon were waiting for me.
This product has a 300-pound weight capacity, patent-pending folding frame, and slider seat frame with wheels that roll along V-groove self-aligning tracks.
The track has a V-Groove cut into it, enabling the plungers to slide out when the panel is hit, preventing damage to the panel.
This design also eliminates the v-groove and limb bolt groove common on 1.5-inch solid limb designs, where limb failure is more common to occur.
The rays are reflected and refracted by micro-patterns at the bottom of the LGP, which could be an array of ink printed white spots (1) or V-groove microstructures (2), (3).
Once the tongue and i groove joints are complete, the solid carbide Radius V-Groove Bit is used to complete the beadboard design.
Dakota Automation's CNC V-groover is designed to accurately V-groove Laminated material.
Full browser ?