The magnitude of the response at the second gear mesh harmonic frequency
was reported to be the highest as compared with the magnitudes of other frequency components .
For notes G4 and higher, the second harmonic frequency
For frequency part, there are narrow band signals which are clock harmonic frequency
, amplitude modulation signal, and wide band time dependent signal.
The young caiman calls of the five best-sampled bays (Bays 9, 21, 35, 46 and 47) were compared regarding their total duration and dominant harmonic frequency
The first harmonic frequency
obtained from a spectral analysis is 4 kHz.
We also used harmonic frequency
ID containers, which told us if and when the subjects opened their containers of study product.
The design data and the ratings of passive filters are dependent on the harmonic frequency
impedances of a particular utility system.
Vials, ampoules and syringes can have their glass integrity validated, since the harmonic frequency
resonance of a fractured, cracked, or chipped item will resonate out of a normal and acceptable range.
The operator then uses instrumentation that measures vibratory amplitudes of the workpiece and determines the present harmonic frequency
The design was accomplished using the following procedures: As a first step, the optimum output impedance at the 10 GHz second harmonic frequency
for maximum output power from the GaAs FET biased in class-B configuration was extracted using load-pull simulation.
As the first natural frequency is in the new solution lower than the 1st perturbing harmonic frequency
, the compressor set is operating in the vibroisolation mode.
This parameter provides a value of the gain or loss through a device either at the fundamental frequency or converted to a higher harmonic frequency
In addition to standard products, PSPL also offers custom comb generators to meet specific input frequency range, output power, harmonic frequency
roll-off and form factor requirements.
The bats' ears have an exquisite sensitivity to their own harmonic frequency
Application of current across a transducer in the handpiece causes the blade to vibrate at its harmonic frequency
of 55,000 Hz.