tool steel


Also found in: Dictionary, Encyclopedia, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Words related to tool steel

alloy steel that is suitable for making tools

References in periodicals archive ?
Caption: The SLD-i cold work tool steel is available in flat cross sections up to 5 inches thick.
a wholly owned tool steel distribution subsidiary, on October 16, 2015, and the assets of Diehl will be transferred to DTS.
Ryerson Holding Corporation (NYSE: RYI), a distributor and processor of metals, has acquired Southern Tool Steel, a privately-owned metals service centre company headquartered in Chattanooga, Tennessee.
Carrs Tool Steels, which supplies machine tool-makers with steel, and employs 30 people, has changed hands for a multi-million pound sum.
The functional performance (testing in blanking conditions) of the tool steel S390 (the best grade in adhesive wear tests) with thin PVD coatings was studied in the same conditions as the blanking performance of carbide composites in our previous research [12,13].
The other scale is the "B" or Brinell scale which is used to determine the hardness of materials softer than heat-treated tool steel such as brass, aluminum and other softer materials.
For each type of tool steel, several bending tests were first carried out to the breakage of the specimen in order to define the typical AE signal pattern in the fully run test.
The contract, valued at approximately SEK70m, covers forged and heat treated tool steel bars, and Scana Steel Bjorneborg will supply both classical plastic mould steels and a new developed steel for plastic mould applications.
Chemical composition of cast tool steel of 55NiCrMoV7 type used in this study is presented in Table 1.
Intended for tool and die shops, this handbook walks through the process of heat treating D2, A2, A6, H13, S7, M2, O1, and W1 tool steel, and provides guidelines for grinding hardened tool steel and selecting the appropriate steel for an application.
BRP Parallel Grippers feature hardened tool steel jaws and support that allow for long tooling fingers, and high moments and force.
The HSS-XE tool steel is fully ground to a proprietary geometry, and hardened to 12% cobalt tool steel without brittleness.
One hundred feet of hardened tool steel rods and a 9 horsepower hydraulic pack are shipped with the Pilot Bore.
While the durability of any mold depends on its complexity and the section sizes of the casting, a typically designed lifetime of a simple H-13 tool steel mold may be 70,000 castings.