(redirected from tenons)
Also found in: Dictionary, Medical, Acronyms, Encyclopedia.
Related to tenons: Tenon's capsule
Graphic Thesaurus  🔍
Display ON
Animation ON
  • noun

Words related to tenon

a projection at the end of a piece of wood that is shaped to fit into a mortise and form a mortise joint

References in periodicals archive ?
Design considerations for mortise and tenon connections.
The bending moment capacity of 2-inch, 3-inch, and 4-inch-diameter southern yellow pine tenons without shoulders or cross pins (Fig.
When early English settlers set about carving themselves a life in the wilderness of America, they built their houses using a kind of joinery they were familiar with: mortise and tenon.
2005 also cite the work of Sparkes (1968) which determined that rectangular and rounded M&T joints were similar in strength and that round mortises with rectangular tenons were substantially weaker.
We've used traditional mortise and tenon construction (see Fig.
The tenoners Henredon uses have up to 29 individual adjustments, involving the machine's trim saw, tenon heads, score saws and cope heads.
The tenons on the lower ends of the corner posts (which frame into the sill) were cut slightly longer than the depth of the sill so that loads applied to the posts were transferred directly to the bed of the testing machine.
The walls of the mortises for the side frame tenons were thoroughly coated with PVA adhesive before the tenons were inserted.
Most of the tests were conducted with 2-inch-diameter tenons, but a limited number of specimens with 3- and 4-inch- diameter tenons were included.
Owing to the reduced cross section of the tenons compared to that of the members on which the tenons are cut, round mortise and tenon joints must be considered as semi rigid.
The principle objectives of the study were to obtain information concerning the cyclic performance of representative chairs with 1) glued only tenons; 2) glued and cross-pinned tenons; and 3) unglued cross-pinned tenons.
In general, joints with tenons 15 mm in width and without tenon shoulder failed as a result of fracture of the tenon, whereas joints with tenons 15 mm in width and with tenon shoulder failed as a result of glue-line fractures, splitting of the tenon and indentation of mortise.
Then remove the staples from the tenons and clean up the rough edges so you can reinstall the drawer front (Photo 1).
Nous tenons a clarifier certaines informations parues dans la Presse Tunisienne.