journal bearing

Also found in: Dictionary, Encyclopedia, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
  • noun

Words related to journal bearing

the bearing of a journal

Related Words

References in periodicals archive ?
Zhang and Yuan [18] tested the journal bearing in high-speed, light-load, and high pressure conditions and designed a relevant test device which used low-viscosity lubricating medium.
Parameter design and tolerance design for journal bearing have been carried out using orthogonal array based Taguchi methodology.
Investigation of when the L/D ratio of the length to the diameter of the journal bearing is small, i.
In the journal bearing, the force vector can be written:
Temco journal bearing assemblies have integrated raceways, which allow for a compact size and high running accuracy with speeds up to 100,000 rpm.
Analysis of the possibilities of a new design of hydrodynamic tilting pad journal bearing with self-aligning pads shows that by control of the clearance between the journal and pads it is possible to keep in front defined conditions of the bearing operation, increase its stiffness and at its research to receive the picture, better showing dependencies of functioning quality of the bearing on its real state.
The narrow journal bearing with shaft angular displacements is shown in Figure 1.
It offers chapters on plastic materials selection, engineering product design, structural design for thermoplastics, thermoplastic gearing design, plastic journal bearing design, thermoplastic spring design, thermoplastic pressure vessel design, thermoplastic assembly methods, thermoplastic effects on design, thermoplastic injection mold design, performance testing of thermoplastics, and thermoplastic product cost analysis.
Higher Load Capacity Journal Bearing j The series incorporates a more robust and more tightly toleranced journal bearing capable of supporting increased levels of weight on bit.
Among the topics are the mechanical properties of kaolin during heating, the critical radius in the effect of transformation toughening of zirconia doped ceramics and cermets, the experimental analysis of steel plasticity parameters during quenching, analyzing abrasive wear in a helical grooved journal bearing, and the tribological behavior of bronze alloys with solid lubricants.
z]), it is obvious that at the central plane the same minimum film thickness is obtained as in the aligned journal bearing case:
In a journal bearing the shaft deflects and a wedge is formed due to the eccentricity between the shaft center and the bearing center.
The nonlinear transient analysis of an oil-film journal bearing under different dynamic loads with Reynolds boundary conditions to predict the threshold of stability have been carried out by [4].