internal angle

Also found in: Dictionary, Encyclopedia, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
  • noun

Synonyms for internal angle

the angle inside two adjacent sides of a polygon

References in periodicals archive ?
0], the mean velocity, P, the supply pipe pressure, [alpha] is the angle relative to the horizon of the nozzle, [mu], the dynamic viscosity, [rho]is the fluid density, x and y are represent the coordinate directions, [theta] is the internal angle of the nozzle, [D.
The smart probe technology provides a methodology to obtain accurate XYZ centerline mapping, bend radius, internal angle and misalignments or deformation data for most pipelines, live or shutdown.
In this case the change of internal angle of friction has an effect on the slope of failure surfaces, and the model of mixed failure with elliptic pressure is the most unfavourable by giving the greatest tension forces in the reinforcements and the smallest factors of safety.
The geometric relationship between those two elements (the internal angle of finlet 5) was also quantified.
For a more permanent cure, insert a chisel or screwdriver into the internal angle between the tread and the riser and prise them apart slightly.
Start at the top tread and use a hammer and bolster to force the folds of carpet between the gripper strips at the internal angle where the tread meets the bottom of the riser.
A convex polygon is a polygon that has every internal angle less then 180 and every line segment between two vertices of the polygon is strictly interior to the polygon except at its endpoints.
Accessory for internal angle 40x25 gutter,accessory for plane angle 40x25 gutter,accessories for external angle duct 20x12,accessories for external angle duct 32x12,accessories for external angle duct 40x25 etc.
Tenders are invited for Supply of Gypsum board Joint Paper tape with center crease, chamfered edges and spark perforation, for easy use in internal angle joints.
This makes each internal angle of PQRSTU equal to 120[degrees].
At a minimum, each curve or segment of curve will be identified with Radius, Arc Length, Chord Bearing, Chord Length and Internal Angle.
Now ask your students to determine the size of the internal angles of a regular pentagon between any two adjacent sides.
With radiused internal angles, polished stainless steel surfaces, 0-ring sealed joints and a behind-the-rotor seal, the pump eliminates areas of product entrapment.
Full browser ?