Statistical models are developed using data of factorial experiments
that were carried out according to close to D-optimal experimental designs [B.
Based on the matrices of a full factorial experiment
on 29-30 July 2006 on the existing road with a gravel pavement two 56 and 28 meters long test sections were constructed.
In this paper, we modify the method suggested by Das (1964) for asymmetrical factorial experiments
of type p x 3 x 2 with (p'-1) replications.
The scope of the optimal recipes of the dispersion systems, applied as polymer matrix precursors, was determined based on factorial experiments
designed as a [2.
Consequently, there is no formulaic easy way to analyze factorial experiments
and interpret the results.
based on results from a full factorial experiment
, recognize which terms should be included in the model
The complete factorial experiments
plan studies all possible combinations of selected factors' levels.
The experimental design was completely randomized and the data were analysed in a factorial experiment
4 x 5, with five replicates for treatments.
The maximum value obtained from full factorial experiment
combinations, can be regarded as exact solution which can be compared to the solution of the experiment based on LB.
This project conducted a factorial experiment
to measure the unconfounded effects of (a) patient attributes (age, gender, race, and socioeconomic status); (b) physician characteristics (gender and years of clinical experience); and (c) cognitive priming status on medical decision making for an actor "patient" presenting with CHD in a videotaped vignette.
The first factorial experiment
shows that low values of the temperature and base concentration assure the process yield values over 87%.
The investigators conducted a factorial experiment
that incorporated varying particle size distributions, fat and lecithin.
A complete 4 x 3 x 2 factorial experiment
(Freund and Wilson 1997) with 10 replicates per cell was conducted to evaluate the load resistance capability of face-to-face joint.
In a fully orthogonal factorial experiment
, embryos were exposed to one of 6 salinity levels (10 ppt, 15 ppt, 20 ppt, 25 ppt, 30 ppt, or 35 ppt) at each of one of 12 temperature levels (16[degrees]C, 18[degrees]C, 20[degrees]C, 21[degrees]C, 22[degrees]C, 23[degrees]C, 24[degrees]C, 25[degrees]C, 26[degrees]C, 27[degrees]C, 28[degrees]C, or 30[degrees]C).
To this end, a full factorial experiment
was conducted on the entire soldering process to determine the best combination of paste/board finishes and to evaluate the effect of nitrogen ambient and lead contamination.