Interest in anisotropic adhesives, or z-axis conductive epoxies
, has recently grown.
Editor's Note: "Performance of Acrylated Epoxies
In UV Lithographic Inks" was presented at RadTech 2002 in Indianapolis, IN.
1] values of neat and modified epoxies
are low compared with those obtained for [k.
For additional information on Dynamis new line of epoxies
, contact Eric DeGrave / Nadia Vizza or visit www.
When compared to diecasting tooling, RPM epoxies
are one-tenth of the cost.
We have had much success using two-part epoxies
(available from the major metalographic suppliers) that cure overnight.
Two commonly used plastics are the epoxies
and the polyurethanes.
They are suitable for applications where properties of epoxies
such as adhesion, corrosion, and chemical resistance are needed, but greater mechanical performance is required.
Supplies Satex brominated flame retardants for epoxies
, engineering thermoplastics, high-impact polystyrene and foams, rigid and flexible urethane foam, or unsaturated polyester applications.
The thermistors are usually epoxies
filled with spiky conductive fillers.
Scientists at the USDA-ARS have developed ways to make effective epoxies
from sucrose found in cane sugar.
9 Lamellar Silicate-Modified Epoxies
(Jannick Duchet-Rumeau and Henry Sautereau).
Based on numerous studies on the morphological properties of rubber-toughened epoxies
, a two-phase microstructure with uniformly dispersed rubber particles of micron size in epoxy matrix is formed.
Many pipeline companies and engineers are specifying Protal 7000 liquid epoxies
for the many applications on new and existing pipelines.
The anhydride-cured biobased neat epoxy containing 30 wt% ESO was not transparent, although the anhydride-cured DGEBF and biobased neat epoxies
containing 30~50 wt% ELO were transparent.