Table 4 shows the deflection and energy ductility
The mechanical performance of crazed polycarbonate was characterized by measuring the yield stress, elastic modulus, failure stress, and ductility
for constant strain rate tensile tests.
The new material has the highest ductility
of any OSU-compliant material in the GE portfolio.
Also, with as little as 1% relative craze density, the failure stress was approximately 10% lower and the ductility
was, on the average, 50% lower than for uncrazed polycarbonate properties.
The filament features a high level of tough ness and improved ductility
down to -30 C/-22 F.
The first is to find the strength of hybrid fibre composites and the second is to evaluate the ductility
of hybrid fibre reinforced concrete specimens.
Under bending test, load-deflection curve of the bolt specimens indicated large ductility
index and clear strain hardening after reaching the proportional limit load.
It is well known that reinforced concrete strength, ductility
and energy dissipation capacity increases with increase in confining reinforcement ratio.
The enhanced characteristics provide for a high strength combined with the optimal ductility
However, the hexagonal close-packed crystal structure of Mg alloy provides limited slip systems which usually results in poor ductility
and formability at ambient temperature.
ToughMet 3 TS 130, a new temper of Materion's high strength, spinodally hardened copper-nickel-tin alloy, offers 10 percent greater ductility
and yield strength of 140 ksi.
Tech-Etch's MP35N is an ultra-high tensile strength metal with good ductility
and excellent corrosion resistance used for medical implants.
The results show that the ductility
and fracture locations predicted from simulations agree well with the experimental results.
Such alloys, containing interdendritic eutectic microstructure, may offer engineers strength and ductility
not currently seen in existing cast alloys.
ASTM 706 grade steel made by Agha Steel, one of Pakistan's largest private steel mills, has proved its high strength and ductility
in high fatigue resistance to seismic loads due to its higher ultimate tensile strength to yield strength ratio, said Director Agha Steel Hussain Agha.