crosscut

(redirected from crosscuts)
Also found in: Dictionary, Legal, Encyclopedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • all
  • verb
  • noun

Synonyms for crosscut

to pass through or over

Synonyms for crosscut

a diagonal path

Related Words

a route shorter than the usual one

Related Words

cut using a diagonal line

Synonyms

Related Words

References in periodicals archive ?
However, in massive regular room-and-pillar mining, which is used in underground limestone mines, the slashing round only has to be used to start crosscuts from the most advanced heading.
Drift tunnels have been driven from the crosscut tunnels either eastwards or westwards along major mineralized structures to test the strike continuity of mineralization zones.
The crosscut, an ax and simple bow saw are the only tools I have used ever since, for felling, bucking, trimming, cutting notches in log construction or any other homestead uses.
Crosscut shredders offer tighter security since they shred a sheet of paper into thousands of tiny particles that are difficult - if not impossible - to reconstruct.
In both the rip-first and the crosscut-first simulations and for all three grade mixes, the majority of the sawlines were made in the second cut-up stage (the crosscut stage in the rip-first simulations and the ripping stage in the crosscut-first simulations).
The Stromnes or Atlas Copco long-hole production rigs mentioned above are used to drill a fan-shaped series of blastholes upwards from the central of the three lower crosscuts along the full width.
For example, if a user wants a disintegrator but really needs only a crosscut shredder to handle his or her specific data destruction requirements, the vendor should tell him or her so.
A new gold zone occurs at the end of Crossscut B, approximately 35 feet west of new mineralized zone indicated in the next paragraph also for crosscut B.
This will require the development of crosscuts and drill stations, and is currently being scheduled for the second quarter of 2006.
The existing 2,000-metre adit and 600 metres of crosscuts will provide access.
Two of the underground drifts and crosscuts were designed to test the vertical continuity of the system.
5-meter wide sulfide vein that crosscuts the breccia returned 9.
New data also allowed us to conclude that hole ELE-05-59 crosscuts the Roberto zone with an intersection grading 3.
In November and December, 2004 Endeavour released high grade silver assays from North Porvenir in two surface drill holes, eight underground crosscuts and two pre-production sill levels.