(redirected from carburized)
Also found in: Dictionary, Encyclopedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
  • verb

Synonyms for carburize

References in periodicals archive ?
This is attributed to the increase in hardness, which made the carburized component relatively brittle when compared to the sintered component.
On the outermost surface these compressive stresses can reach more than-2GPa for carburized and more than-6GPa for nitrided 316L stainless steel [13].
Carburized parts with inhomogeneous structure are distinguished by the wide variety of micro-constituents and their properties through the all carburized layer.
The carburized section will have carbon content high enough so that it can be hardened again through flame or induction hardening.
In comparison with bearings made of ordinary carburized steel, Super-TF material offers up to 10 times the life with contaminated lubrication and up to twice the life where the lubricant is clean.
If fully employed to replace heat treating in net-shape gear processing for carburized steels, TMP would save 36.
The volume's 15 chapters address component design, overview of the mechanisms of failure in heat treated steel components, mechanisms and causes of failure in heat treated steel parts, general aspects of failure analysis, failure in steel forging, failures from the casting process, sources of failures in carburized and carbonitrided components, fatigue fracture of nitrided layers, steel heat treatment failures due to quenching, steel failures due to tempering and isothermal heat treatment, failure analysis in tool steels, case studies of steel components failures in aerospace applications, failure analysis of powder metal steel components, induction hardening, and failure analysis of steel welds.
Carburized gears are said to enable this company to increase a gear's torque capacity.
The pulley is a self-contained drive unit with an internal, high efficiency, NEMA inverter duty motor and an internal set of Class 10 carburized and ground gearing.
The model SN2169 is a heavy-duty, foot-mounted highspeed reduction gear which are helical, carburized and precision ground gears for increased strength and vibration-free, quiet operation, the company said.
As a result, the upper surfaces of the casting, which are in contact with the mold for only a short period of time due to volumetric contract during solidification and cooling, are less likely to be carburized.
Specifications for carburized parts in current aerospace gearing materials include cryogenic treatments that improve dimensional stability, minimize retained austenite levels, increase surface hardness, and improve wear properties.
Among the topics are measuring residual stresses in surface treated stainless steel groove welds, evaluating arc evaporated coatings on rounded surfaces and sharp edged, residual stresses in dissimilar weld joints, the experimental analysis of shot peening on carburized for carbonitrided parts, measuring stress in aluminum using a Gbel mirror as the primary beam optics for an X-ray diffractometer, the thermal fatigue study of hardfaced hot forging tools using numerical analysis and residual stress evaluation, and investigating residual stress distribution in wheel rims using neutron diffraction.
The carburized and tempered specimen shows a better result of 950*[10.
Specific topics include interaction between liquid magnesium alloy and glassy carbon particles, the effect of pre-treatment on the corrosion resistance of superheated materials, and the effect of process temperature on the surface layer of vacuum carburized low-alloy steel gears.