Analysis: Sections were cut from each casting to compare casting microstructures to the baseline castings.
Furthermore, creep deformation can lead to cracking of the protective oxide scale causing an accelerated carburization
15] has been of considerable interest for some years but there has been relatively little work on process variables during the surface hardening process reported by Xu and Kuang  since controlling parameters in carburization
is a complex problem as stated by Aramide, et al.
Properties of ultrafine tungsten carbide and cemented carbide by direct carburization
Carpene, E, Flank, AM, Traverse, A, Schaaf, P, "EXAFS Investigation of Laser Nitridation and Laser Carburization
Locating pins for jigs and fixtures are available in a range of styles: round or diamond shape, with or without shoulder, for set screw or nut fixing, in 4137/SCM415 steel or 304/440C stainless, with hardening or carburization
surface treatments, as applicable.
A broad size and style range, such as round or diamond shapes, with or without a shoulder, for set screw or nut fixing, in 4137/SCM415 steel or 304/440C stainless, with hardening or carburization
surface treatments as applicable.
The coating is designed to prevent corrosion, oxidation, carburization
, and sulfidation that commonly occur in gas, liquid, steam, and other hostile environments.
The oxidation and carburization
of Fe-Mn-Al alloys in a carbon-containing atmosphere".
, a process in which carbon diffuses into steel, can occur at high temperatures when steel is contacted with oil or carbon deposits.
FASCOLOY 601 is an iron aluminide alloy that not only holds up at high temperatures without the use of toxic alloying elements like nickel or chromium, but has shown unmatched corrosion resistance to the forces of sulfidation, oxidation, and carburization
does show an awareness of the smith's practical knowledge that higher carburization
of a weapon's cutting edge (i.
When austenitizing, care must be taken to avoid carburization
or decarburization by carefully monitoring the heat-treating atmosphere.
The process takes about 20 seconds, a significant reduction from four- to 10-hour carburization
process of old.
One of the root causes of these problems resides in the surface decarburization or carburization
of the sintered parts which are the result of carbon potential fluctuation in the sintering furnace.