carbon arc

Also found in: Dictionary, Encyclopedia, Wikipedia.
Related to carbon arc: carbon arc lamp
Graphic Thesaurus  🔍
Display ON
Animation ON
  • noun

Synonyms for carbon arc

has carbon electrodes

References in periodicals archive ?
The XMT 350 CC/CV and XMT 450 CC/CV multiprocess welding power sources are capable of MIG, stick, TIG and flux-cored welding, along with air carbon arc cutting and gouging, and provide the flexibility of a 14-pin connection for spool guns, feeders and remote controls.
Chockalingam, "Structural, nanomechanical, field emission and ammonia gas sensing properties of nitrogenated amorphous carbon films deposited by filtered anodic jet carbon arc technique," Talanta, vol.
The metal at the riser contact area is melted with an electric carbon arc and blown off with a compressed air nozzle integral to the rod holder.
Welding capabilities for the Trailblazer 302 include Stick, MIG, flux cored, ac/dc TIG, air carbon arc cutting and gorging and air plasma cutting and gorging.
It provides a CC/CV welding output for MIG, Stick, and Lift-Arc DC TIG welding, as well as air carbon arc gouging.
Other issues with the carbon arcs are the lack of moisture control, and the low resemblance to natural sunlight--along with the major objection: that the carbon arc test standard is obsolete.
Students in Welding II complete study in occupational orientation and safety, advanced shielded metal arc welding (SMAW), semi-automatic arc welding [gas metal arc welding and flux-cored arc welding (GMAW/FCAW), gas tungsten arc welding (GTAW), carbon arc cutting principles and practices (CAC-A), plasma arc cutting (PAC), and employability skills.
They can weld anything from very light sheet metal to heavy plate and carbon arc gouge with 3/16- or 1/4-in.
Wang of Georgia Tech compared nanotubes produced by traditional high-temperature carbon arc discharge to nanotubes grown through a lower-temperature catalyst-assisted process.
Looking like a big arc welder of the future from Tomorrow's World, a carbon arc weatherometer is a device to simulate in 1500 hours 10 years of real-life exposure of the paint to the elements.
The group used the standard carbon arc technique for synthesizing buckminsterfullerenes, but added various powdered metals to one of the graphite electrodes.
Arcair, the brand well known for carbon arc gouging, also provides products for a wide-range of industry uses, including exothermic cutting and underwater welding products.
For instance, carbon arc gouging presents a problem because the carbon winds up puddling on the pipe and must then be ground off.
TIG, solid wire and carbon arc gouging with 3/16-in, carbons.
The technique characterizes nanotubes produced by traditional high-temperature carbon arc discharge and nanotubes grown at a lower temperature by catalyst-assisted pyrolysis.