brake disk


Also found in: Dictionary.
Related to brake disk: brake caliper
  • noun

Words related to brake disk

a disk or plate that is fixed to the wheel

References in periodicals archive ?
The Influence of Braking Time on Uniform Heat Flow in Coupling Brake Disk
Uniform heat flow (q) on surface friction, the friction torque components of brake disk and linear variation in velocity considering time (during braking) are determined referring to relationship (10) where the total drag resistance is determined experimentally (coefficient expressions a, b and c are determined by experimental tests in wind tunnels or the current line).
Tests were performed in a laboratory setting, as well as on industrial cast brake disks produced at a metalcasting facility according to typical operations.
The cast brake disks underwent normal machining procedures at the metalcasting facility.
The aft right wheel stays in the trailing position (with the brake and brake disk facing inboard) and the tow bar attached to it.
the Japanese unit of the French automaker Renault SA, said the manufacturer had installed a smaller brake disk for the front wheel braking system and that the brake pad may come off the disk when the brake is put on, causing a lack of braking power.
This causes the brake pad to be pressed against the brake disk.
A year later, in 1954, the first ventilated brake disks were implemented to the AlfaRomeo car.
Owing to the stability of operation, the cost of raw-materials and the ease of production, a material commonly used for brake disks is grey cast iron, where graphite occurs in the form of small lamellas that look in the cross-section like threads (graphite lamellar cast irons).
It can be equally productive in the automotive industry, machining alloyed gray cast-iron brake disks, and in the rollproducts segment removing casting crust or heavily worn rolling surfaces.
The brake disks are produced by first compressing short carbon fibers, carbon powder and rosin, then sintering the mix at 1 1,000[degrees]C.
Problem is, the pads can be worn down dangerously close to the brake disks And you won't even know it.
Sales in the automotive casting area have increased due primarily to superior sales of brake disks to the European automobile industry.
Air Force approval of its patented RD process for refurbishment of F-16 aircraft block 30 carbon brake disks.
The RD process for refurbishing F-16 aircraft brake disks satisfies all Air Force Safety of Flight qualification requirements.