For circuit level simulation we choose Lookup table
controller to each leaf node and global node of logic block.
This research paper proposes an estimation technique to construct a lookup table
for a three-phase inverter to drive a three-phase induction motor.
Instead of using a single uniform partition (direct lookup table
approach) , the technique can be realized by segregating the ROM into various sizes of interval mapping with the domain function of addition and subtraction algorithms.
The DISs finds out and confirm about the receiver DIS/component from the Lookup Table
in self-allocator component.
Therefore, this step compares the IP and MAC address with the lookup table
, and blocks users with disallowed or unregistered IP and MAC addreses.
When we use this lookup table
in future formulas, we will refer to it by its name, LENDER_Rates.
If the headings in the lookup table
contain the exact same region names found in the heading row of the table, you could use a MATCH formula to return the correct column number: =VLOOKUP(A2,RegionTable
In the sinusoidal control approach, the torque command is 'vectorized' through a sinusoidal lookup table
, thereby developing a separate command for each winding of the motor.
The on-board Cyclone II FPGA contains 8,256 four-input Lookup Table
(LUTs) logic elements equivalent to 66,048 CAP7 MP block gates.
This deviation can be overcome by performing a calibration procedure on the I and Q voltages and storing the results in a lookup table
The depreciation method is chosen from a client lookup table
The worksheet consists of two sections: the data entry form (Figure I), which we print out each month and send to the accounting department as a report, and the vertical lookup table
Columns H:I in Figure 2 show how to convert the bonus table in Figure 1 to the lookup table
used for finding ranges.
In-camera pre-processing functions include automatic white balance, a lookup table
(or LUT) for certain lighting conditions and a blemish-compensation function.
There are two ways to change the behavior of a display, by adjusting the controls on the monitor itself, or by adjusting the signals that get sent to the monitor by tweaking the values in the video card's lookup table