Inconel


Also found in: Dictionary, Encyclopedia, Wikipedia.
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Words related to Inconel

a nickel-base alloy with chromium and iron

Related Words

References in periodicals archive ?
Table 1: Mechanical properties of N155, Inconel 625 & Titanium Alloy Material Tensile Density Young's Poisson's Yield Strength, kg/m3 Modulus ratio Strength MPa Mpa Mpa N155 689 8249 143 E03 0.
Machining of Inconel 718 has been the subject of many studies.
The Atlas Inconel 625 bursting disc can withstand a wide range of temperatures, as well as burst pressures ranging from 4.
According to Arcam, the Inconel process is initially available for the Arcam A2X platform.
com)-- Tech Steel and Materials is announcing that they are supplying the alloy Inconel 718 to manufacturers of industrial machines that need protection from extreme temperatures (ranging from -423[degrees] to 1300[degrees]F).
Inconel is a trademark of the Special Metals Corporation, but it risks in the firearms community of slipping into being a generic name.
Attention is focussed on the Inconel 718 family in the following paragraphs [1-2].
The housing of the piezoelectric charge accelerometer is made of Inconel alloy and has been hermetically sealed, making it suitable for harsh industrial environment usage.
The Saber Tooth provides cool, fast-cutting action on aluminum, stainless steel, Inconel, titanium and other hard-to-grind metals, resulting in lower grinding and finishing costs.
This saw, according to the supplier, also is well suited for cutting stainless steels, Inconel, and other highly alloyed pipe without leaving a heat-affected zone.
GPMS Rupture Disk assemblies are manufactured from 304 stainless steel and incorporate either an Inconel or stainless steel disk, which minimizes the effects of varying processing temperatures, DME says.
Inconel is just as strong as steel but significantly lighter.
Max-Flute tools use shallow, radial widths of cut, which transfers less heat to the cutting tool and allows higher surface speeds for roughing titanium, Inconel and other high temperature alloys that have traditionally required high torque at low rpm to achieve desired removal rates.
The model has a V8 engine, and includes two new rear mufflers made from a chrome-nickel alloy called Inconel.
The check valves are cast and machined in carbon steel and then shipped to Arc Energy's Gloucestershire factory for weld overlay cladding, with Inconel 625 being applied to all wetted surfaces.