gear

(redirected from Gear teeth)
Also found in: Dictionary, Legal, Encyclopedia, Wikipedia.
  • all
  • noun
  • verb

Synonyms for gear

Synonyms for gear

things needed for a task, journey, or other purpose

to supply what is needed for some activity or purpose

Synonyms for gear

wheelwork consisting of a connected set of rotating gears by which force is transmitted or motion or torque is changed

a mechanism for transmitting motion for some specific purpose (as the steering gear of a vehicle)

equipment consisting of miscellaneous articles needed for a particular operation or sport etc

set the level or character of

References in periodicals archive ?
This indicates that the tips of the gear teeth were the last parts being filled during the molding process.
The device functions by two-stage transmissions, the secondary is a circular arc gear teeth cylindrical worm gear transmission, the first input end setting a pair of straight gears, protection class IP68, with adjustable full open or closed position limit device.
We solve problems to do with either reducing friction or improving performance - for example making gears and bearings last longer; designing new ultra-low friction materials for use in aerospace bearings; developing computer models to predict the failure of the contacting surfaces of gear teeth, and to simulate their lubrication; evaluating the effect of surface finish and micro-texture on performance of hip-replacements; detecting gear damage in gearboxes for For-mula 1 cars and in bearings for helicopters and wind turbines.
1981) developed ECH setup for high accuracy finishing of spur gears and reported an improvement in the accuracy of profile as well as in the surface finish of the spur gear teeth and reduction in noise level.
Fluoro-polymer material used to improve the tribological behavior of the gear teeth and for the noise reduction is the Xylan 1052 dispersion--produced by Whitford Plastics Ltd, the UK, which is applied only on the flanks of teeth gears in one, two and three layers, the thickness of a layer being, after appropriate heat treatment, of 12 to 20 microns.
Steps 25 and 26 in WP 0098 00-16 of TM 9-2350-256-20-1 (Nov 05) have you use a screwdriver and a piece of wire to lift and push the coupling flange toward the steer clutch housing while also using a second screwdriver to turn the steering tie shaft to engage the gear teeth.
This company offers everything from casting a gear box to carburizing gears and CBN finishing of the gear teeth.
This operation finish turns the outside diameter of gear teeth.
The oil circuit is split with one side cooling and lubricating the gear teeth, and the other feeding oil to the gear actuators.
One was the V-22 transmission adapter on the Osprey, which features cast-to-size gear teeth, the ability to handle a tremendous load and the replacement of hundreds of details previously machined and welded together.
It is said to achieve uniform crystallization on all surfaces of the gear teeth and has shown excellent lifetime performance in actual gear tests.
The gearhead itself uses non-integer gear ratios, which distributes the wear uniformly among all gear teeth.
The Ikona gear teeth pair has a very high contact ratio and no tip interference, thus having zero backlash.
However, poor surface finish of teeth profile produces additional dynamic forces and reduces the transmitting efficiency, in-service performances and life span and hence, finishing of gear teeth profile turns into a vital issue in present day scenario.
Therefore, the gear teeth must be error-free for smooth noiseless motion transmission.