extrusion

(redirected from Extruder)
Also found in: Dictionary, Medical, Legal, Encyclopedia, Wikipedia.
  • noun

Synonyms for extrusion

squeezing out by applying pressure

Synonyms

Related Words

References in periodicals archive ?
Also highlighting a recently built PVC blister sheet line for thermoforming that can use up to 80% scrap, with a BA120 twin-screw extruder and vertical calender.
Strand processing equipment line (located between extruder die and pelletizer) includes high line rate cooling baths, vacuum/blower water removal units and auxiliary strand drying racks.
Rubber extruder screw design, by comparison, has received relatively little attention.
Bowl and extruder housing are jacketed for steam, water, or oil heating to 100 psi at 300 F.
System is complete from infeed conveyor to size reduction unit, metal detection and sorting, holding capabilities and automated feed to extruder.
Windmoeller & Hoelscher revealed that it has built its first extruder (4 in.
Randcastle single-screw lab extruder with three Recirculator mixing sections at Rutgers University's Polymer Science lab blended 20% PS into PE and produced mostly sub-micron PS domains without use of compatibilizers.
It has a fixed plasticating extruder that melts the resin and mixes and dissolves the gas that is injected through a port in the barrel.
Screw extruder types (hot/cold teed) will be discussed, in addition to barrels, screws, screw types (gear extruder), two-stage screws, continuous mixers/twin screw extruders and feed devices.
com/research/q7wm7r/global_plastic) has announced the addition of the "Global Plastic Extruder Industry Report 2014" report to their offering.
Running a small polyolefin pipe extruder with a high-speed "hyper drive" doubles output without any extra gear wear, says Cincinnati Extrusion, Erlanger, Ky.
The screw-type extruder is said to provide a smooth transfer of the compound to the gear-pump.
It compares and describes different types of extruders, their functions and their applications in the food industry, and discusses characteristics, advantages and disadvantages, and applications for each extruder type.
or 3700 lb/hr of PLA sheet, the company says--double the typical rates with a 90-mm extruder.
Options: Oriented discharge and trim, broad range of extruder throughputs.