According to the Guide Note, exposure time
matters to the valuation process because:
The thesis of this article is that exposure time
can only be (1) a historical fact as experienced by a property that has been sold, or (2) a standard that is explicitly or implicitly defined in every value definition.
The dependence of the thickness of removed polymer layer on the plasma exposure time
is shown in Fig.
Wet condition with 1 hour exposure time
increased growth and development of roots.
SUMMARY OF THREE-WAY MANOVA ON THE EFFECT OF HOST EXPOSURE TIME
AND MODE, MEDFLY STRAINS, AND INTERACTIONS OF THESE CATEGORICAL FACTORS ON DIACHASWMORPHA LONGICAUDATA EMERGENCE (EMERGED ADULT PARASITOIDS), PARASITOID SEX RATIO (PROPORTION OF FEMALE OFFSPRING), AND HOST MORTALITY (DEAD HOST LARVAE PLUS NON-ECLOSED HOST PUPARIA).
Similar to the results for the PBT polyester illustrated in Figures 2 and 3, the majority of the polymers produced smooth craters at a constant rate regardless of exposure time
or irradiance level.
Figure 5 shows the change in surface roughness of EP films as a function of UV exposure time
A single exposure index was identified for each original study and, where data were available, each combination of exposure time
window and pesticide type (unspecified, insecticides, herbicides).
The most important input variables are noise levels, exposure time
When this exposure time
is multiplied by the number of reflux events over the course of the entire sleep period, it has significant ramifications for the development of erosive esophagitis, strictures, Barrett's esophagus, and esophageal cancer, the researchers noted.
By means of the ANOVA, it was found (Table 1) that exposure time
and protection type influences TS with 0.
Stereo image capture for either sensor head can be triggered externally or internally independently of exposure time
This study demonstrated that after a very short exposure time
of about one second (system generates three pulses per second) the vitamin D2 content of these mushroom varieties increased from very little to upwards of 800% of the daily value per serving.
After reaching the minimal contact angle, the KOH developer starts to affect the nonprinting areas faster and in a more aggressive way than the NaOH developer, which was already calculated when varying the exposure time
, with developing time set as a constant value.
The major modification is an extended chemical exposure time
from 15 to 60 minutes that reflects the robust barrier function of the EpiDerm model.