(redirected from Eutectics)
Also found in: Dictionary, Medical, Encyclopedia.
Related to Eutectics: Eutectic temperature, Eutectic point
Graphic Thesaurus  🔍
Display ON
Animation ON
  • noun

Words related to eutectic

a mixture of substances having a minimum melting point

Related Words

References in periodicals archive ?
This project will provide a clear improvement of our fundamental understanding of solidification pattern formation in ternary eutectics and have strong impact on the international community by opening the way to the control, and hence to the optimization of the properties of solidification-processed composite materials.
The elevated temperature (662F or 350C) tensile properties of the Al-Ni, Al-Fe and Al-Fe-Ni eutectics are superior to those of the Al-Si eutectic with the 662F (350C) tensile strength of the Al-Ni-Fe eutectic being the highest among all four eutectics.
One of the dreams of the authors is to eventually make a eutectic spray with which they could spray any object of interest and, for example, make it invisible.
The variations at the Fe-C and Pd-C eutectics from the individual emf-T relationships of the three thermocouples are not larger than a temperature equivalence of at most 0.
It is determined that in electron beam remelting in the structure of cast high speed steel R6M5 form eutectics of two types: laminar one (55-60 vol.
During solidification, the eutectic with the lowest melting point is often surrounded by already solidified particles from the eutectics with the higher melting points.
Characterisation of the p* Method of Eutectic Aggregates Spatial Distribution in 5xxx and 3xxx Aluminum Alloys Cast in Wedge Moulds and Comparison with SDAS Measurements (P.
The different eutectics that can form in SAC alloys are Sn5Cu6 (227[degrees]C), SnAg3 (221[degrees]C) and Sn+SnAg3 +Sn5Cu6 (217[degrees]C).
Sphere Communications and Eutectics announced today that the new IP200T USB phone has been integrated with the new Sphericall 4 system from Sphere Communications.
Besides the ternary ferrite-cementite-iron phosphide eutectic and the previously mentioned binary eutectics (austenite and cementite and austenite and graphite), it is possible to obtain a binary ferrite-iron phosphide eutectic in cast iron.
When these two eutectics combine, a tertiary Fe-C-P eutectic, with a still lower melting point, will occur in the micro-structure.