electric arc

(redirected from Electrical arc)
Also found in: Dictionary, Encyclopedia.
Related to Electrical arc: Voltaic arc, Arc discharge, arcing
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Synonyms for electric arc

References in periodicals archive ?
A mathematical characteristic equation has been defined by using the data related to the electrical arc current and voltage characteristic and curve fitting methods with the help of Matlab curve fitting toolbox.
TVOC-2, the newest generation of ABB Low Voltage Products division's Arc Guard System, protects electrical equipment from dangerous electrical arc flashes.
Engineers have determined that the fault began as either a short circuit or an electrical arc in the P100 power distribution panel, most likely caused by the presence of foreign debris.
The second involved the April 9 injury of two employees who were burned by an electrical arc flash.
The three projects, for electrical arc flash, site systems safety and electrical detail design came after TAS' electrical safety services were profiled in the Tees Valley finals.
Haycock, aged 53, terrified a couple in the Leeswood area by firing the stun gun in their home, showing the blue electrical arc that it created.
The process for producing the steel columns includes several steps: Melting scrap metal in an electrical arc furnace and casting it into near final shapes which are then reheated and sent through a rolling mill to achieve the final I-beam shapes.
According to the company, the gloves significantly increase protection against heat from electrical arc, flame, but will not support flame.
Buffalo, NY, have developed Carbtex and ThermHQtex Electrical Arc, Flame, and Thermal Personal Protection Materials.
No, it's an electrical arc flash created when conductive objects such as wires, connectors, or tools get too close to a high amperage source.
A high-pressure hydraulic leak met an electrical arc that ignited the fine mist.
This action is necessary to prevent contact between the compensator for the Simmonds FQIS system and a flapper check valve on a baffle rib in the main fuel tanks, which - in conjunction with another wiring failure outside the fuel tank - could result in an electrical arc and a consequent potential source of ignition in the fuel tank.
As his students edged closer to the intense heat of the school's new orbital welding torch, College of the Canyons teacher Jack Compton admonished them to get their faces, and eyes, even closer to the 20,000-degree Fahrenheit electrical arc.
Then in 1885, Russian researcher Stanislav Olczewiski learned that an electrical arc between an electrode and a grounded piece of steel generated enough heat to melt the steel.
Full browser ?