He joined to these a spiral, two inches in diameter
, which terminated in two branch pieces of unequal length, the longer of which, however, was twenty-five feet in height and the shorter only fifteen feet.
She was standing with her back against a column which rose from the center of the apartment from floor to ceiling--a hollow column about forty inches in diameter
in which he could see an opening some thirty inches across.
It was about a foot in diameter
at the big end, and he had expected to get a good saw-log, but it was so rotten as to be fit only for fuel, if for that.
I felled a cedar-tree, and I question much whether Solomon ever had such a one for the building of the Temple of Jerusalem; it was five feet ten inches diameter
at the lower part next the stump, and four feet eleven inches diameter
at the end of twenty-two feet; after which it lessened for a while, and then parted into branches.
PFERD has expanded the range of DUODISC combination cutting and grinding wheels to include 6- and 7-inch diameters
PRODUCT LAUNCHES II-29 Interplast Unveils HDPE Pipes with Diameters
up to 1000mm II-29 DPI Plastics to Unveil PVC-M Couplings for LDPs II-29 Molecor Introduces Novel Manufacturing Technology for Large Diameter
PVC-O Pipes II-29 Polypipe Expands Size Of Rigistorm XL Series II-29 DPI Plastics Expands PVC Range in Africa II-29 Fiberspar Unveils Spoolable Large Diameter
FRP Pipes II-29 Molecor Introduces PVC-O Pipe with 630mm Diameter
II-29 Sabic Introduces New HDPE for Pressure Pipes II-29
Clamps %100 mm% diameters
fittings with Nut-Bolts (for fixing the pipes straight in position) of approved make all complete as per specification and direction of E/l.
The new version introduces the ability to cut linear parts from stocks with appropriate diameters
and /or material types.
The outside diameters
of the two shafts tested in 1993 were .
In addition, preterm infants had 18% larger left ventricular diameters
As a result of more than 20 years of experience in designing, manufacturing, testing and operating various types of inspection instruments, all Rosen MFL inspection tools are designed to perform inspections in pipelines with varying diameter
sizes, for example, dual diameters
of 20 and 22 inches.
Larger and smaller diameters
are possible with both step feeders.
For spherical particles of unit density, settling times (for a 3-m fall) for specific diameters
are 10 s for 100 [micro]m, 4 min for 20 [micro]m, 17 min for 10 [micro]m, and 62 min for 5 [micro]m; particles with a diameter
<3 [micro]m essentially do not settle.
There are 3 diameters
associated with threads that more accurately define the thread size.
A relatively simple and inexpensive mechanical system changes pipe and calibrator diameters
in 15 minutes, as compared with an hour or two for standard pipe systems.