Instead of applying a bias voltage
for the photodiode, we chose the bootstrap method to increase the shunt resistance of our PV HgCdTe detector.
During the testing period, solar modules were exposed to 1,000 volts of bias voltage
under the condition of 85 Degrees Celsius/85% relative humidity.
The LPV531's performance alternates from standby to full- power mode by varying the bias voltage
on this same external resistor.
Other useful features include the device's bias voltage
(VBB) pin, which allows it to supply the correct voltage to a single-ended VCXO, eliminating the need for external resistors and thereby simplifying the design.
The integrated MOSFET gate driver bias voltage
of the ISL6310 and ISL6308 is programmable from 5V-12V, allowing the designer to achieve the optimum trade-off between the switching and conduction losses associated with the upper and lower MOSFETs.
The PFC bias voltage
is disabled and the circuit enters in skip mode in standby condition, which yields no-load power consumption of less than 200 mW.
5-V Bus with Separate Power and Bias Voltage
Pins -- Pin-Compatible with TI's 6-A and 9-A SWIFT Converters (TPS54610 and TPS54910) Availability, Pricing, Packaging
The methodology validates how a designer can trade off performance with power through the use of an offset bias voltage
source providing up to 3.
It also features a complete Beyond the Rails signal chain, enabling the entire system to process inputs in excess of the bias voltages
for each component.
Demolition and milling of the pads; Removal of the concrete edge shelves; Hydrodynamic concrete removal; Making external bias voltages
to the side members; Renewal of the border, Kerbs and concrete adjustments to the bridge ends; Rehabilitation of local concrete defects; Application of surface protection systems; Replacement of the bridge and seal of the pads; Collapse of the road crossings.
With its ability to accurately and automatically evaluate all input, output and reverse transfer power device capacitance at high bias voltages
, Agilent's B1507A Power Device Capacitance Analyzer is well equipped to address this task.
Differing from the conventional system using an LCD resistive bias network, this system produces LCD bias voltages
without a wasted DC bias current, thereby dramatically cutting LCD drive current losses.
Automatic bias control allows for quick setup and easy operation of the modulator while the manual bias control capability gives users the ability to take control of all bias voltages
for testing specific scenarios.