It was shown that the CNOT gate can be implemented using three partially polarizing beam splitters
(PPBSs) with suitable polarization-dependent transmittance and reflectance, where the essential interaction is realized by a single intrinsic PPBS (PPBS A), while the other two supplemental PPBSs (PPBS B) act as local polarization compensators on the input qubits.
The video system evaluated did not have a beam splitter
and, therefore, magnification was not the same as that seen thorugh the scope.
This stretching allowed the researchers to have their cake and eat it too: Instead of choosing early on whether to include the second beam splitter
, they could place it or remove it just as the pulse crosses the spot where the paths merge.
Dobrowolski, "High-performance thin-film polarizing beam splitter
operating at angles greater than the critical angle," Appl.
The film, situated between the cube beam splitter
and the core, was embedded in a index-matching liquid to prevent scattering due to the surface roughness.
The laser diode (LD) sends a coherent bean through the pin hole (PH) which spreads it into a cone of light which is partially reflected off the beam splitter
(beam cube BC) to become the reference beam.
1] using a DTGS detector and KBr beam splitter
, with a resolution of 2 [cm.
GRENOUILLE (french for "frog") is a SHG FROG device that uses a Fresnel biprism to replace the beam splitter
, delay line, and beam-recombining optics of the autocorrelator.
For example, to form a LAN for a group of computers using the new link design, each machine in a room would be equipped with a low-power infrared source and a holographic beam splitter
Tenders invited for Supply of Dielectric beam splitter
Because of the experiment's design, GE0600 is much more sensitive to the sideways motion of the beam splitter
than are other large gravitational wave detectors.
Xenotech's screen was 5' diagonal size, projecting large displays via a beam splitter
, also using head tracking.
The slider contains a Pal beam splitter
that reflects 100% of the linearly polarized light and transmits 50% of the light from the HBO illuminator Carl Zeiss MicroImaging Use InfoLINK 4Hl178 or Call 800-369-0153
The test procedure employs a beam splitter
that reflects a portion of the laser source to a reference calorimeter and transmits a portion to a primary calorimeter as shown in Fig.
The separation of one wavelength band from another by a dichroic beam splitter
has applications from color separation to chemical analysis.